The young M&S Logistics Ltd. Container fleet
IMO Type 1 Beam Tank
  •  
 Type: IMO type-single compartment

Insulated and steam heated tank container
tc-beam-sml.gif (6599 bytes)
  •  
 Dimensions:
Length
Width
Height		 mm
6,058
2,438
2,591		 ft
20
8
8		 in
0
0
6
  •  
 Capacities: 24,000 litre
25,000 litre		 6,340 US gallons
6,604 US gallons
  •  
 Weights:
Max. gross
Tare		 Kgs
31,000
from 3,620 to 4,220		 Lbs
68,342
from 7,984 to 9,308
  •  
 Pressures:
Working pressure
Test pressure
Steam operating pressure
Design pressure @ 130 oC
Steam test pressure
Relief valve		 Bar
4.0
6.0
4.0
6.0
6.0
4.4		 Psi
58.0
87.0
58.0
87.0
87.0
64.0
  •  
 Shell material: Stainless steel, 316 A240
  •  
 Code: ASME VIII, division 1 where applicable
  •  
 Temperatures:
Maximum cargo temperature		 Centigrade
120		 Fahrenheit
248

  •  

 Approvals: Construction Certificate (Lloyd's/B.V./A.B.S.), UIC, CSC, TIR, ISO, IMO1, UK & US (DOT), RID/ADR, TC, AAR600 FRA

  •  

 Standard fittings:
Manlid 500mm (20") diameter, 8 closure (fore and aft) SWR (Sweet White Rubber)/PTFE (Teflon)
Relief valves 2 x 2.5" Safety Relief Valves with flame proof gauze. 2 x Rupture Disc fitted with a rupture pressure of 4.84 bar @ 20ºC. 2 x Manometer fitted with a range of 0-10 bar
Air inlet valve 1.5" s/s Ball Valve and End Cap
Top discharge 3" s/s Port and Blank Flanges. Syphon Tube provision
Spillboxes Two off, with no covers. External Stainless steel drain tubes
Bottom discharge 3" s/s Footvalve. 3" s/s Butterfly Valve. 3" s/s B.S.P. and Cap. Remote Trip
Insulation 50mm (2") rigid polyisocyanurate foam over tank shell, compressed mineral wool over steam pan area, clad in Marine Grade White Aluminium
Steam heating 7 elements welded to external underside giving 8 square meter coverage. 3/4" B.S.P. with Plastic Caps
Thermometer Fitted. Analogue in ºC and ºF
Specification subject to change.
Detailed specification and drawings available on request.

Frame Tank Container Specification